모든 발표 자료 및 화상회의 무단 촬영, 배포, 복제 등은 엄격하게 금지되어 있습니다.
PS2
고분자 복합재료

PS2-1
P, Mo dual doped NiV ultrathin layer engineering effect on 1D-TiC for improved overall sea water splitting
Van Hien Hoa, Huyen Thi Dao, Mai Mai, 김도환(전북대학교)
PS2-2
Hierarchical binary metal nitride nanorod arrays supported on nickel foam: An efficient and stable bifunctional electrocatalyst for water splitting
Dinh Chuong Nguyen, Tran Thien An Nguyen, Xinfeng Zhu, Sukhpreet Singh, 김남훈, 이중희(전북대학교)
PS2-3
Dual Single Atoms doped MoS2 Nanosheets-Based Catalyst for High-Performance Overall Water Splitting
Muhaiminul Islam, Tran Khoa Dang, Duy Thanh Tran, 김남훈, 이중희(전북대학교)
PS2-4
Development of dense impermeable polyurethane/epoxy-nanocomposite containing stitched graphene oxide-boron nitride hybrid nanofiller for H2 gas barrier applications
Subhabrata Saha, 손완수, 김남훈, 이중희(전북대학교)
PS2-5
Facile synthesis of CuS nanostructure and their electrocatalytic properties of vanillin oxidation in food products
Sivaprakasam Radhakrishnan, 김병석(전북대학교)
PS2-6
Effect of Bio-based Epoxy Resins on the Properties and their Applicability to Gas Insulated Switchgear Spacer Materials
조한구, 노요한, 이재형 (성균관대학교)
PS2-7
Nanorod-like Co-MOF arrays supported on three-dimensional carbon framework as an advanced oxygen evolving catalyst toward accelerating water splitting
Thi Luu Luyen Doan, Quang Nhat Quynh Vo, Tan Nam Luong, 김철상, 박찬희(전북대학교)
PS2-8
구조용 에폭시 폼/CFRP 샌드위치 패널 제조 및 특성
이재호(다이텍연구원), 박용민(라스씨앤씨), 권일준(다이텍연구원), 박연호(아진산업)
PS2-9
아웃 오브 오토클레이브 프리프레그 제작을 위한 저온 경화 수지 연구
최순호, 박성민(다이텍연구원)
PS2-10
Exploring the diverse morphology of porous poly(lactic acid) fibers for developing long-term controlled antibiotic delivery systems
김주란(한국생산기술연구원)
PS2-11
산화유도시간을 활용한 케이블 노화상태 감시
박경흠, 김한수, 박혜성, 김건태(한국수력원자력 중앙연구원)
PS2-12
Thermo-Mechanical Properties of Epoxy Composites with Ceramic fillers
설미나(성균관대학교), 김나연, 정준영(비드오리진), 남재도, 박인경(성균관대학교)
PS2-13
선박용 대형 레이더 마스트의 최적 공정 설계
김태엽, 하종록, 윤성원(중소조선연구원)
PS2-14
Thermo-rheological behaviors of phenolic resin blended with petroleum pitch for high temperature carbon composites
양재연, 이혜민(한국탄소산업진흥원)
PS2-15
시뮬레이션을 통한 직물 구조에 따른 폴리에틸렌 기반 자기강화복합재료 물성 분석
이종혁, 이도현, 유성훈, 이필규, 이준희, 심지현(다이텍연구원)
PS2-16
고무보강소재 제작에 활용 가능한 공중합 아라미드 방사를 위한 수지 물성 및 구조 모델링
여동현, 이종혁, 이준희, 유성훈(다이텍연구원), 박용태, 성정훈(태광산업), 심지현(다이텍연구원)
PS2-17
전산 수치해석에 따른 CFRP 물성예측과 실험적 물성의 연관성 고찰
박문식, 윤원호, 민지훈, 우영한, 이준숭, 주성욱(경북하이브리드부품연구원)
PS2-18
화재안전 도료 소재의 비선형 재료모델을 응용한 3D모델링 생성연구 및 시뮬레이션을 통한 물성 예측 기술 개발
유성훈, 이도현(다이텍연구원), 이병수, 김대철(강남제비스코), 심지현(다이텍연구원)
PS2-19
바인더 수지 종류에 따른 도전성 페이스트의 물리적 특성 및 Ag flake 부피 분율에 따른 시뮬레이션에 관한 연구
김민성, 윤현성(다이텍연구원), 박종수, 전성민(평화산업), 심지현(다이텍연구원)
PS2-20
Cu@Ag 이중구조 분말을 이용한 차폐 특성에 관한 연구
전유재, 김호권(여주대학교)
PS2-21
3D 프린팅 된 금속과 복합소재의 접합 특성 연구
김무선(한국철도기술연구원)
PS2-22
초고분자량 폴리에틸렌(UHMWPE)을 활용한 미래자동차용 고강도 열가소성 폴리머 복합소재 개발에 관한 연구
강민수(선문대학교), 윤종환(공주대학교)
PS2-23
탄소복합재 적용 파티션패널의 비틀림 성능 개선에 대한 연구
윤원호, 이재진, 강다경, 주성욱(경북하이브리드부품연구원), 김덕윤(삼양사), 권원호(신영), 추민우(한국몰드)
PS2-24
Manufacture of transparent glass fiber-reinforced composite material with controlled transparency under various curing conditions
김동규, 강성현, 김관우(한국탄소산업진흥원)
PS2-25
항공용 일방향 탄소섬유 강화 복합재료 국산화 개발
김병주, 오창빈, 이정민, 박종규, 이형익(국방과학연구소), 정종민, 김정철(한국카본)
PS2-26
자동차 Center Pillar Outer 부품의 성형해석을 통한 탄소복합소재 형상 평가
조형찬(한국섬유기계융합연구원), 석주성, 송영빈, 강민희(신화에스티)
PS2-27
건식 배합법을 활용한 탄소섬유/폴리프로필렌 복합재의 물성에 대한 연구
노정우(구미전자정보기술원)
PS2-28
Polyaniline-Coated?Recycled?Carbon?Fiber?Papers?as?Flexible?Electrodes?for?Symmetric?Supercapacitor?Applications
유승민, 마민정(전북대학교), 고영웅, 강영식(디쏠), Sivaprakasam Radhakrishnan, 정용식,김병석(전북대학교)
PS2-29
Preparation and Characterization of Activated Porous Carbons Derived from Biomass Kenaf by Chemical Activation
노재현, 이계열(전북대학교), 이혜민(한국탄소산업진흥원), Sivaprakasam Radhakrishnan, 고태훈, 김병석(전북대학교)
PS2-30
Fabrication of Heterometallic CoMoNi Phosphide 3D-Nanosheets as Bifunctional Electrocatalyst for Efficient Overall Water Splitting
Mani Ram Kandel, Uday Narayan Pan, Dasu Ram Paudel, Purna Parsad Dhakal, 김남훈, 이중희(전북대학교)
PS2-31
MoS2 Nanosheets Assembled on CuCo2S4 Nanorod Arrays as an Efficient Bifunctional Electrocatalyst for Water Splitting
Xinfeng Zhu, Dinh Chuong Nguyen, Tran Thien An Nguyen, 김남훈, 이중희(전북대학교)
PS2-32
Platinum Single Atoms Coupled 2D Nickel Hydroxide Nitrate Catalysts for High-performance Hydrogen Evolution Reaction
Huu Tuan Le, Duy Thanh Tran, 김남훈,이중희(전북대학교)
PS2-33
P-doped Fe2W0.5Se2 nanosheets supported on 3D nickel foam as bifunctional electrocatalyst for highly efficient and stable overall water splitting
Sukhpreet Singh, Dinh Chuong Nguyen, Xinfeng Zhu, 김남훈, 이중희(전북대학교)
PS2-34
Hybrid Trimetallic-Organic Framework-derived nitrogen and carbon co-doped NiFeMn-P Ultrathin Nanosheet Electrocatalyst for Proficient Overall Water-splitting
Ram Babu Ghising, Uday Narayan Pan, Dasu Ram Paudel, Mani Ram Kandel, 김남훈, 이중희(전북대학교)
PS2-35
Two-dimensional MXenes-MoS2/Fe,V-phthalocyanine Hybrid as Excellent Electrocatalysts for Overall Water Splitting
Phan Khanh Linh Tran, Duy Thanh Tran, Thanh Hai Nguyen, Deepanshu Malhotra, 김남훈, 이중희(전북대학교)
PS2-36
Rational design of wet spun MXene/PAN fiber-derived multichannel porous MXene/CF and NiCo2S4 electrodeposited MXene/CF electrodes for fiber-shaped asymmetric supercapacitor
Debarani Devi Khumujam, Tolendra Kshetri, 김남훈, 이중희(전북대학교)
PS2-37
Interfacial Engineering of Ni2P-Fe2P Anchored CoP Nanowire Arrays as Advanced Electrocatalysts for Overall Water Splitting
Kai Chang, Duy Thanh Tran, Jingqiang Wang, 김남훈, 이중희(전북대학교)
PS2-38
Design of Hierarchical CoVPx Nanostructures with Mo Doping Effect for Efficient Overall Water Splitting
Jingqiang Wang, Duy Thanh Tran, Kai Chang, 김남훈, 이중희(전북대학교)
PS2-39
Single-Atom Pt Anchored on MoAl1-xB MBene for Highly Efficient Hydrogen Evolution
박석주, Duy Thanh Tran, 남성웅, Thanh Hai Nguyen, 김남훈, 이중희(전북대학교)
PS2-40
Fabrication of functionalized MXene reinforced semi-interpenetrating network nanocomposites with superior hydrogen gas barrier properties
손완수, Subhabrata Saha, Anandarup Bhattacharyya, 김남훈, 이중희(전북대학교)
PS2-41
Stretchable translucent nanocomposite membranes derived from sugar templates for mechano-responsive optical applications
윤서한, 류태현, 최희은, 박준용(금오공과대학교)
PS2-42
Polyamide 6 입자로 강인화된 에폭시/탄소섬유 복합재의 경화온도에 따른 기계적 특성 변화
이교문, 석지훈, 추용식(한국세라믹기술원), 김윤해(한국해양대학교), 배성열(한국세라믹기술원)
PS2-43
Fine-tuned charge carrier properties of TIPS-Pentacene single crystal and its applications towards strain sensing.
Indirajith Palani, 성명모(한양대학교)
PS2-44
다기능성 폴리포스포네이트/황 도핑 환원그래핀옥사이드 나노복합체 개발
류덕(한국과학기술연구원), 손홍래(조선대학교), 유남호(한국과학기술연구원)
PS2-45
Preparation and electrocatalytic applications of biomass derived activated carbons with high micropore volume and surface area
김다영, Sivaprakasam Radhakrishnan, 김병석(전북대학교)
PS2-46
Effects of Solvent and Thermal Treatments on Mechanical Properties of Glass Fiber
이민국, Sivaprakasam Radhakrishnan, 고태훈, 김병석(전북대학교)
PS2-47
Mechanically and Electrically Enhanced PAN/PVDF/Lignin Based Carbon Nanofibers for Flexible Supercapacitor Applications
마민정, 유승민, Sivaprakasam Radhakrishnan, 고태훈, 김병석(전북대학교)
PS2-48
Manufacturing of nucleating agent and natural fiber composite to improve the thermal stability and impact resistance of polylactic acid
박종연, 김관우, 한웅(한국탄소산업진흥원)
PS2-49
Enhanced Charge Transport of Conjugated Polymer/Reduced Graphene Oxide Composite Films by Solvent Vapor Pre-Treatment
Kyokunzire Proscovia, 장민철(전남대학교)
PS2-50
Visible-light absorption of charge-transfer complex thin-film phototransistors using molecular layer deposition
Dai Cuong Tran, Quang Khanh Nguyen, 성명모(한양대학교)
PS2-51
Poly(3-hexylthiophene) (P3HT) organic field effect transistor for sensitive ammonia gas sensor
문서현, 박영은, 성명모(한양대학교)
PS2-52
Fabrication of conjugated polymer (CP) nanowire imbedded films with nanoporous structure for OFET based gas sensor applications
정강훈, 장민철(전남대학교)
PS2-53
Insulative ethylene-propylene copolymer-nanostructured polypropylene for high-voltage cable insulation applications
이성환, 김도균, 유승건(한국전기연구원)
PS2-54
불소로 기능화된 환원 그래핀 옥사이드 복합소재 제조
정채은(한국과학기술연구원), 손홍래(조선대학교), 유남호(한국과학기술연구원)
PS2-55
우레탄 변성 에폭시를 이용한 이종재료의 열팽창 완화 현상 확인
심경보, 김현중(서울대학교)
PS2-56
난연성 향상을 위한 폴리이미드 코팅 폴리우레탄 폼의 제조
신하은(한국과학기술연구원), 고흥조(광주과학기술원), 유남호(한국과학기술연구원)
PS2-57
황 공중합체의 물성 향상을 위한 합리적인 역가황 반응 조건
이미연(한국과학기술연구원), 박종진(전남대학교), 유남호(한국과학기술연구원)
PS2-58
매트릭스의 용융 점도 제어로 유도된 세그리게이트 네트워크 변화
김기훈(전북대학교), 장지운(한양대학교), 김성륜(전북대학교)
PS2-59
실리카 및 카본블랙 바이너리 필러 시스템의 비율이 ENR/BR 복합재료의 물리적 특성 및 미세먼지 발생에 미치는 영향
송상훈, 류경찬, 김동혁(부산대학교), 하진욱(한국자동차연구원), 김원호(부산대학교)
PS2-60
Preparation of thermally robust, transparent polyimide through organosilicate nanohybrids
진정운(한국과학기술연구원), 한재량(전북대학교), 유남호(한국과학기술연구원)
PS2-61
에어프라이어 처리된 탄화 커피박을 이용한 친환경 단열 복합재료
김성진, 이혜성, 김성륜(전북대학교)
PS2-62
고함침성 기지재를 이용한 폴리프로필렌 자기보강복합재 공정창 확장 연구
이혜성, 진혜지, 최우성, 황하연, 김성륜(전북대학교)
PS2-63
ZnO/탄소 동소체 기반 하이브리드 압전 필러를 혼입한 고분자 복합 재료의 압전 출력 성능
김건수, 강민경(전북대학교), 장지운(한양대학교), 오명준, 김성륜(전북대학교)
PS2-64
New model on the electrical conductivity trend of polymer composites
소순오(전북대학교), 장지운(한양대학교), 오명준, 김성륜(전북대학교)
PS2-65
MWCNT로 강화한 광경화 3D 프린팅용 우레탄아크릴레이트 복합소재의 기계적 특성
조현준, 이명훈, 이범주(전북대학교)
PS2-66
Vanillin-based epoxy compound resin as matrix for all-green natural fiber composites
Duc Hoa Pham, Bijender Kumar, Dickens Owino Agumba, Samia Adil, 김재환(인하대학교)
PS2-67
기계적 변형에 따른 탄소나노튜브 폴리머 복합체 성능 평가
정유진, 이승준, 장승환(한양대학교)
PS2-68
도로 블랙아이스 사고방지를 위한 탄소나노튜브 복합체 발열 성능평가
이승준, 정유진, 전혜경, 장승환(한양대학교)
PS2-69
Fabrication and characterization of 3D composite foams for dye removal application
Thi Sinh Vo, 김경훈(성균관대학교)

한국복합재료학회
법인명 : (사)한국복합재료학회 ㅣ 대표자 : 이중희 ㅣ 고유번호 : 112-82-04154 ㅣ 주소 : 06627 서울시 서초구 사임당로 174 (서초동, 강남미래타워) 601호 ㅣ
전화 : 02-598-1550 ㅣ 팩스 : 02-598-1557 ㅣ 이메일 : composites@kscm.re.kr

본 사업은 기획재정부의 복권기금 및 과학기술정보통신부의 과학기술진흥기금으로 추진되어 사회적 가치 실현과 국가 과학기술 발전에 기여합니다.

Copyright 2008 by the Korean Society for Composite Materials